CAT6A CAT7 RJ45 Network Connector, KUYiA Network Modular Plug Toolless for Installation Cable

Product description

• [Wide compatibility]: Suitable for The devices with standard RJ45 socket, such as RJ45 Module / RJ45 Network Socket / R45 Patch Panel / Switch

1.Remove the Cable tie before installation
2.Insert cable into strain relief boot,strip off 1.2inch of cable jacket,fold back braid
and drain wire
3.Fan out all four twisted pairs,following the color coding label and allocate each
conductor into proper slots on wiring cap.Trim the ends of conductors.
4.Place wiring cap on plug.
5.Place the wiring cap onto plug,use plier to clamp wiring cap until it completely snap-in to effect the connection.
6.Close plug cover,make sure the drain wire is in proper contact with grounding clip
on plug,Pull back strain relief boot to cover the plug,fasten supplied cable tie to
secure grounding contact.